News and Blogs

Vision inspection systems and machine vision are important inventions in automation control and quality assurance systems. The most advanced feature of these methods is the ability to take images and interpret them using cameras, sensors, and computational methods, similar to human beings performing sight-dependent operations. Nowadays, vision inspection systems are

A glove leak tester is a piece of equipment that proves very helpful in determining the ability of gloves to protect one against contamination in an area where such conditions are needed. Such a tool applies in areas like pharmaceuticals and healthcare, where such devices require a sterile environment to

1. Normal operation procedure of the equipment 1). In the normal production process, the operator as far as possible, the gloves will be flat and uniform on the fixture, the thumb towards the side, and the gloves should be put on the wrist over the sealing ring above the 15mm

1. Precaution To avoid injury, read the manual carefully before using the machine, fully understand its functions, and operate it in the prescribed manner. The machine should only be operated by trained professionals, not unqualified personnel. Under no circumstances should the machine be turned manually to avoid damage to the

This section provides maintenance and care requirements for the more commonly removed and majorly located parts of the Glove Air Leak Detector to facilitate the operator’s repair and replacement of consumables, as well as ordering parts. 1. Maintenance of equipment The fuselage should be maintained regularly for a maximum of

1. Common Head Failures 1.1 Automatic stoppage of a machine head Reason 1: A higher failure rate of products or glove operation by employees leads to a higher failure rate; thus, rejecting the same machine head many times in a row occurs rather than a problem with the equipment. Solution: